Opus Bernini, LLC

Opus Bernini, LLCOpus Bernini, LLCOpus Bernini, LLC

Opus Bernini, LLC

Opus Bernini, LLCOpus Bernini, LLCOpus Bernini, LLC
  • Home
  • Shop
  • About
  • Contact - 617.844.1200
  • Sell
  • More
    • Home
    • Shop
    • About
    • Contact - 617.844.1200
    • Sell
  • Home
  • Shop
  • About
  • Contact - 617.844.1200
  • Sell

Restoring the glory.

Our machines get lots of attention.

So you love them for years to come.

Test & Inspect

1-2 Hours

A functional test on any and all stitches, including the basic, basting, ecorative, reverse, satin, and buttonhole. We listen carefully to the sound of the machine as it stitches. We check motor brushes, power supply capacitors, clean out free arm and feed dog, oil and manually test all lubrication points, check timing, bobbin winder, plastic gears. We check that upper and lower thread tension is to specification. The foot controller is checked for corroded carbon tracks, bad capacitors.

Repair & Restore

2-3 Hours

If we have found any plastic gear, motor brush, capacitor, wire, mechanism not to specification, we change this this now. Cleaning of all electrical contacts. We test and set the timing, clean tensioner channel and test upper and lower tension. We use a 100x microscope to inspect the hook and bobbin for burring. We then repeat the testing process so that we don't overlook any other potential issue. We run the machine for at least 10 minutes at different speeds. We then sew on all stitches.

Electrical Circuit Board Repair & Restore

2-3 Hours

One of the only mechanical or electrical weak points of these vintage Berninas are the foil and electrolytic capacitors that were used during that era by many manufacturers. We test and replace with high quality ERO (tm) brand capacitors to give the machine many years of service. We run ESR and current tests on the circuit board and replace any transformer, choke, resistor, connector, switch or component that is likely to fail or is failing. 

Make it look almost new.

1-2 Hours

Unit is cleaned of lint and excess old grease and oil on the inside, and then the outside of the machine is degreased, polished, and paint is touched up with OEM Sherwin Williams Polane two-part paint  needed. The machine is then given a coat of anti UV wax. Items are removed from the case and the case is cleaned on the inside and out. Hinges and latches are checked. A copy of the manual is printed if the original is not present. Missing items are added as deemed appropriate.

Packing is an art.

With great skill and care, we prepare your machine for shipment. Items are individually wrapped, and skilfully boxed so that they reach you for their moment of unwrapping. Shipping sewing machines is an art. We guarantee our machines reach you as we sent them out.

A piece of mind.

Our value to you is that we service and refurbish these vintage machines so that you can enjoy them. If you don't love the machine, return it in the same condition to us within 60 days and we will offer you a full refund or find you another of our machines. It is that simple. Our experience and expertise is the value added. View full warranty information here.

Featured Products

Copyright © 2022 Opus Bernini, LLC - All Rights Reserved.

  • Privacy Policy

This website uses cookies.

We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.

DeclineAccept